Bring Your Logs Back to Life.

Clean and brighten bare logs and wood, remove surface dirt, and pollen, and kill mold for maintenance, and keep your logs looking fresh with CPR Log Cleaner and Brightener.

CPR is used to clean and brighten uncoated wood that is dirty, faded, or gray from UV exposure. Mix CPR to the brightening solution strength for use on new construction just prior to staining to remove dirt and grime from logs during the building process and to break down mill glaze. Mixed at the log cleaning solution strength—use for periodic cleaning of stained logs to extend the life of your stain.

One container makes 4 to 8 gallons of solution depending on cleaning strength desired.

Use on most any exterior wood surface (see Where Not to Use for exceptions). Will not damage or discolor most building materials. Always test in an inconspicuous area first.

Do not use on high-tannin woods, like Redwood and Douglas Fir. Always test in an inconspicuous area first.

How much CPR do I need?

• At cleaner strength (8:1), 1 container mixed will clean 750-1,000 square feet, depending on wood porosity

Gentle yet effective

• Oxygenated bleach formula removes dirt, pollen, and other surface contaminants (bird poo, anyone?) to reveal clean, fresh wood.

Kills mold and algae

• Strong enough to get rid of those pesky microorganisms that degrade your stain.

Easy to mix and apply

• Water and a pump sprayer are all you need.

Safe to use around pets and kids

• Even if Fido and Freddy get some on them, it rinses easily and won’t do any damage.

Sold in 1/2 gallon powder concentrate.